SAAS Wheel Spacers Forged HubCentric 5x150 PCD 110 Bore 25mm Thick | WS515011025

SAAS Wheel Spacers Forged HubCentric 5x150 PCD 110 Bore 25mm Thick (part number WS515011025) is available from JDM Mods NQ. Review the specifications and fitting notes below to confirm suitability for your setup.

WS515011025 Wheel Spacers Forged HubCentric 5x150 PCD 110mm Bore 25mm Thick

SAAS Forged Hub Centric spacers are CNC machined to suit a variety of wheel hub pitch circle diameters (PCD) and feature a 0.02mm tolerance for accurate fitment. The centre bore external face lip provides a locating point for your wheels and gives the spacers their hub centric status which lessons the locating load on your wheel studs.

The spacers are supplied with ISO Grade 10 wheel nuts and Grade 10.9 studs which surpass salt spray tests and have a conical seat mount to securely affix the spacers to your hub. The hub centric design reduces vibrations from misaligned rims and aids the transferral of bolt/stud loads to the hub axle.

Our spacers are beautifully finished in a hard anodised coating to help resist corrosion and, depending on thickness and model, come with a knurled edge design and rear face reliefs to aid removal.

Fitting Notes:

Check your PCD, thread sizes and hub centres (both on the hub and on your rims) to ensure you have selected the correct spacer(s). Before affixing, make sure the mounting face on your wheel hub has been cleaned and is free of rust and/or any imperfections that will prevent a flush face-to-face mount.

Features

• Forged 6061-T6 High Strength Alloy
• Knurled finish on spacer edge
• Machined rear lip with slots for ease of removal
• Nuts: ISO Grade 10 M14x1.5
• Studs: ISO Grade 10.9 M14x1.5
• PCD: 5x150
• Centre Bore: 110mm Hub Centric
• Thickness: 25mm
• OD: 190mm

Shipping specifications