SAAS Exhaust Wrap Fibreglass 50mm (2in) x 10m | SHWF5010

SAAS Exhaust Wrap Fibreglass 50mm (2in) x 10m (part number SHWF5010) is available from JDM Mods NQ. Review the specifications and fitting notes below to confirm suitability for your setup.

SHWF5010 Exhaust Wrap Fibreglass 50mm (2in) x 10m

Our SAAS exhaust wrap is a must have for your vehicle's exhaust system. Designed to retain heat within the exhaust pipes, exhaust wrap helps improve the efficiency of the exhaust by decreasing density, and increasing the flow of exhaust gases. Under-bonnet temperatures can be reduced when using exhaust wrap. Your vehicle's electronics, air-intake systems, dash components and interior also benefit from exhaust wrap, as it reduces their heat absorption

Fitting Notes:

Fibreglass exhaust wrap can be used wet, at is allows the material to become flexible, and aids with creating a tighter wrap during installation. To prevent your mild steel exhaust/pipes from rust, ensure wrap is completely dry, before spraying a high-temperature silicone coating to seal and protect your pipes and wrap.

Features

• Fibreglass material
• Length: 10m
• Width: 50mm (2 in)
• Temperature rating (intermittent): 2500°F / 1371°C
• Temperature rating (direct): 1800°F / 982°C
• Thermal conductivity: 0.029 - 0.035 W/mK
• Thermal expansion coefficient: 5.4 ppm/°C
• Sound absorption coefficient: 0.80 - 0.93%
• Thermal coated fibres: Yes

Shipping specifications