SAAS Water Temp Gauge 40°-120° 52mm Muscle Series II Black 12V | SGWT52BS2

SAAS Water Temp Gauge 40°-120° 52mm Muscle Series II Black 12V (part number SGWT52BS2) is available from JDM Mods NQ. Review the specifications and fitting notes below to confirm suitability for your setup.

SGWT52BS2 Water Temp Gauge 40°-120° 52mm Black Muscle Series 2

Keep an eye on your vehicle's water temperature and be on the alert for possible overheating or other potential engine issues.

What's Included :

• Water Temp Gauge
• Water Temperature Sender
• SGA-320051 Brass Adaptor Bush (3/8" NPT - 1/8"NPT)
• Wiring Loom
• Mounting Bracket and fittings

Fitment Notes:

The sender can be mounted directly into an available water temp port (for example, inlet manifold), piggy backed off the OE sender/switch using a brass T-Adaptor or most commonly, into a top radiator hose inline t-piece. Should the standard sender wire not be long enough, splice in an additional length of wire with a gauge NO GREATER than supplied loom wire. SAAS recommends <= 20AWG wire. Use of a heavier gauge wire or of too greater length will impact resistance and distort temperature readings.

Features

• 40°-120° Temperature Range
• LED lighting with 4 colour options
• Micro switch for backlight changes
• Replacement spares available (see below)

Shipping specifications

Browse SAAS parts at JDM Mods NQ