SAAS Thermo Fan Switch 1/8NPT on 85° C / off 76°C | SFC103

SAAS Thermo Fan Switch 1/8NPT on 85° C / off 76°C (part number SFC103) is available from JDM Mods NQ. Review the specifications and fitting notes below to confirm suitability for your setup.

SFC103 - Thermo Fan Controller Switch

Replacement sender to suit the following Thermo Fan Controllers:

• SFC1001 - Single Thermo Fan Controller Kit
• SFC1002 - Dual Thermo Fan Controller Kit

Fitting Notes:

• Switch thread size is 1/8-27 NPT
• Switch turns on 85° C / off  76°C
• Maximum installed switch depth - 31mm

In most engine cooling system applications, coolant travels through the block, up in to the cylinder head(s), and out of the engine at the thermostat housing. From there, it passes to the radiator to be cooled.

Ideally the temperature probe should be plumbed into the system where the coolant is hottest - generally, the thermostat housing, in the coolant passages adjacent to it, or in the water jacket of the cylinder head(s).

You can use a SAAS brass adaptor to tap into an available coolant jacket port, or in the absence of any of these alternatives, splice into your top radiator hose using a SAAS Water Temp Adaptor fitting.

Shipping specifications