Paragon PPS330 Titanium Brake Pad Shims Rear Brembo

Paragon PPS330 Titanium Brake Pad Shims

A great heat management upgrade to improve braking performance for track and race applications. Paragon titanium pad shims are made of high-quality Grade 5 titanium (6AL-4V / ASTM B348) and fit between the brake pads and calipers, acting as an effective thermal barrier due to titanium's significantly lower thermal conductivity.

When the rotors and pads are hot, heat transfer via the caliper pistons to the calipers and brake fluid can lead to fluid overheat and brake fade. Fluid fade results in a soft brake pedal, reduced modulation, and — at worst — sudden loss of braking power at the track. The PPS330 shims reduce this heat transfer, keeping your hydraulic system cooler and your braking consistent lap after lap.

Beyond performance, these shims protect your caliper seals, dust boots, and brake fluid from excessive heat degradation — lowering long-term maintenance costs and reducing wasted track time from boiled fluid replacements.

• ✅ Improved safety by helping prevent brake fade and failure
• ✅ Extend the life of brake components and lower long-term maintenance cost
• ✅ Grade 5 titanium (6AL-4V / ASTM B348) construction
• ✅ 0.5mm (0.02") thickness — direct fit, no modification required
• ✅ Set of 4 (axle set)

Specifications:

Common Applications:

• 04–17 Subaru WRX STI (GDB / GRF / GVF / VAB) — Rear
• Subaru BRZ Performance Package / Scion FR-S / Toyota 86 w/ OEM Brembo calipers — Rear
• Subaru BRZ tS — Rear
• Mitsubishi EVO 5–9 (CP9A / CT9A) Brembo — Rear
• Nissan 350Z (Z33) Brembo / Infiniti G35 Coupe Brembo — Rear
• Paragon PA026 calipers
• AP Racing CP5119 / CP5316 / CP5317 calipers (CP5119D50 Pads)
• StopTech ST-22 / STR-22 calipers

Lead times may vary. Contact us at coore.com.au for availability and shipping estimates.

Browse more Paragon Brakes parts at JDM Mods NQ