Discover the next evolution in engine tuning with our advanced Direct Injection (DI) control module. The DI Driver-4 is a highly configurable, cost effective and integrated solution, designed to give you full control of most modern solenoid type direct injectors and high-pressure fuel pumps.
Each DI Driver-4 module can allow up to four high voltage peak and hold solenoid Direct Injectors and one high pressure peak and hold Fuel Pump to flow up to their maximum amount of fuel at a very high engine RPM.
When combined with a G5 Voodoo Pro ECU, up to three DI Driver-4 modules can be connected together to control up to 12 Direct Injectors and two independent High Pressure Fuel Pumps. Together the G5 Voodoo Pro ECU and DI Driver-4 modules can control both Direct Injection and staged Port Injection on a single tune, giving you the ultimate all-in-one solution to achieve greater power and efficiency.
Connecting to your ECU and other DI Driver-4 modules is easy thanks to CAN Bus compatibility. Set-up has been simplified with our easy-to-use free DI Link software, which is highly user configurable over USB.
Housed in a durable, sealed CNC enclosure with a waterproof Superseal automotive connector, it’s engineered to withstand demanding conditions.
All this is backed by the industry-leading reliability and support you’ve come to expect from LinkECU.
The time has now come to unleash your Direct Injection engine with Link’s DI Driver-4, the easiest, most effective and most affordable way to tune DI on the market.
• Four Direct Injection Injector Drives
• One High Pressure Fuel Pump Drive
• Water Resistant, -40 to 80 °C Operating Temperature
• 1 x CAN bus with software configurable termination
• 1 x USB Type-C for configuration via DI Link software (free download, Windows only)
• Sealed CNC billet aluminium enclosure
• 26-Way waterproof Superseal automotive connector
• Uses the Super Seal D plug
• Compatible with a wide range of engine management systems, and solenoid direct injectors. (Does not support Piezo Direct Injectors)
• Max Boost Current: 17.9A, Max Boost Voltage: 65V
• Max Peak Current: 17.9A, Max Peak Duration: 2000uS
• Max Hold Current: 5.0A, Max Hold Curation: 164mS
• Max engine RPM running a Bosch HDEV: 14,200RPM
Link Engine Management Ltd – Limited Lifetime Warranty
This Limited Lifetime Warranty applies to all Engine Control Units (ECUs), Power Distribution Modules (PDMs), DI-Drivers, and CAN-Lambda modules (“Products”) manufactured by Link Engine Management Ltd.
WARRANTY COVERAGE
Link Engine Management Ltd warrants that its Products are free from defects in materials and workmanship under normal use and installation, for the lifetime of the Product, subject to the limitations outlined below. This warranty applies only to the original purchaser of the Product and is non-transferable.
If a defect arises and a valid claim is received, Link Engine Management Ltd will, at its sole discretion:
repair the defective Product, or
replace it with a new or refurbished Product of comparable function.
If a Product is found to be defective, it must be returned to the original place of purchase along with proof of purchase. Any repaired or replaced Product is covered only for the remainder of the original warranty period.
WARRANTY EXCLUSIONS
This warranty does not cover:
Products that have been damaged or impaired due to incorrect installation, misuse, neglect, accident, or external causes,
Normal wear and tear or cosmetic damage,
Products that have been modified or used with incompatible software or components,
Are installed in highway-registered vehicles (Products are intended for off-road use only).
CONSUMER RIGHTS
This warranty provides specific legal rights and may be supplemented by local consumer protection laws in your country. Where applicable, you may have additional rights under national legislation, including but not limited to:
The Consumer Guarantees Act (New Zealand),
The Australian Consumer Law,
The Magnuson-Moss Warranty Act (USA),
The EU Consumer Rights Directive.
Nothing in this warranty limits or excludes any rights you may have under such laws.
LIMITATIONS
Link Engine Management Ltd is not liable for any:
Indirect or consequential losses (such as vehicle damage, loss of income, or labour costs),
Damages arising from the use of the Product outside its intended purpose,
Failures caused by third-party software or incorrect setup of user-configurable features.
SOFTWARE LICENCE
The Product includes a user-configurable software programme, which must be installed using the latest version available from the Link Engine Management website.
The warranty is voided if:
The incorrect or outdated software version is used, or
The user attempts modifications or setups that aren’t supported.
The software included in the Product is licensed, not sold. It may only be used in accordance with Link’s license terms. Link Engine Management Ltd grants the user a non-exclusive license to use the software:
Only in the country where it was originally acquired,
On a single device at a time,
In accordance with the applicable End User Licence Agreement (EULA).
If the license is terminated by you or by Link (e.g. for breach of terms), the software must be permanently deleted.
