Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).
Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.
The keypad is designed for ultimate reliability - IP67/IP69K water and dust resistant, -40 to +70 operating temperature range, UV 400hrs, salt spray resistant and switches rated to 3 million operations.
Can be installed both inside and outside, perfect for street, track and off-road use.
Note: Keypad ships with empty button inserts, inserts need to be selected and purchased individually. 1 x Link ECU Logo Button Insert included in box loose.
Features:
- CAN Configurable with G4X PC Link – Change LED backlight, individual button indicator ring colour, programmable to show change in status, flashing option, multiple modes including momentary, latched and toggle.
- Customizable Button Inserts – The replacement system for individual inserts makes modifying the keypad layout simple and economical.
- IP67/IP69K Waterproof rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. The IP69K rating provides protection against high pressure water at high temperature spray downs.
- Compatible with all G4X ECU’s. Built-in support from G4X PC Link vers 6.22 onwards
Box Contents:
1 x 4 Button CAN Keypad
1 x DTM4 Mating Connector Kit
1 x Link Sticker
1 x Keypad Button Insert – Link Logo
Specifications:
Connector - DTM4 Connector for CAN and Power (Black = Ground, Red = Power, White = CAN High, Blue = CAN Low)
Switch Life - 3 million operations
CANopen Node ID – 0x15 (21)
Default Baud Rate - 1000kbit/s
Ingress protection Rating – IP67/IP69K
Chemical Resistance - Deet, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange Citrus Cleaner, Muriatic Acid
UV Protection - UVB 400 hours
Salt Spray Per - ASTMB117
Dimensions – 65mm (W) x 70mm (H)
Mounting Specs:
Mounting Stud Gap (Centre to Centre) 28.8mm
Nuts thread: #10-32
Maximum torque: 0.8Nm
Link Engine Management Ltd – Limited Lifetime Warranty
This Limited Lifetime Warranty applies to all Engine Control Units (ECUs), Power Distribution Modules (PDMs), DI-Drivers, and CAN-Lambda modules (“Products”) manufactured by Link Engine Management Ltd.
WARRANTY COVERAGE
Link Engine Management Ltd warrants that its Products are free from defects in materials and workmanship under normal use and installation, for the lifetime of the Product, subject to the limitations outlined below. This warranty applies only to the original purchaser of the Product and is non-transferable.
If a defect arises and a valid claim is received, Link Engine Management Ltd will, at its sole discretion:
repair the defective Product, or
replace it with a new or refurbished Product of comparable function.
If a Product is found to be defective, it must be returned to the original place of purchase along with proof of purchase. Any repaired or replaced Product is covered only for the remainder of the original warranty period.
WARRANTY EXCLUSIONS
This warranty does not cover:
Products that have been damaged or impaired due to incorrect installation, misuse, neglect, accident, or external causes,
Normal wear and tear or cosmetic damage,
Products that have been modified or used with incompatible software or components,
Are installed in highway-registered vehicles (Products are intended for off-road use only).
CONSUMER RIGHTS
This warranty provides specific legal rights and may be supplemented by local consumer protection laws in your country. Where applicable, you may have additional rights under national legislation, including but not limited to:
The Consumer Guarantees Act (New Zealand),
The Australian Consumer Law,
The Magnuson-Moss Warranty Act (USA),
The EU Consumer Rights Directive.
Nothing in this warranty limits or excludes any rights you may have under such laws.
LIMITATIONS
Link Engine Management Ltd is not liable for any:
Indirect or consequential losses (such as vehicle damage, loss of income, or labour costs),
Damages arising from the use of the Product outside its intended purpose,
Failures caused by third-party software or incorrect setup of user-configurable features.
SOFTWARE LICENCE
The Product includes a user-configurable software programme, which must be installed using the latest version available from the Link Engine Management website.
The warranty is voided if:
The incorrect or outdated software version is used, or
The user attempts modifications or setups that aren’t supported.
The software included in the Product is licensed, not sold. It may only be used in accordance with Link’s license terms. Link Engine Management Ltd grants the user a non-exclusive license to use the software:
Only in the country where it was originally acquired,
On a single device at a time,
In accordance with the applicable End User Licence Agreement (EULA).
If the license is terminated by you or by Link (e.g. for breach of terms), the software must be permanently deleted.
