FENIX: RACE3388-FA56A, FAN3388-T
Core size: 368 x 612 x 56mm
Direct replacement for:
Holden Kingswood HG-HX Chev V8 / LS2 Swap
Holden Torana LH-LX Chev V8 / LS2 Swap
Transmission: Manual & Auto
Fan CFM: 1050cfm each
Radiator & Fan Measurements:
Top of cap to bottom of tank - 490mm
Tank to tank - 465mm
Tank thickness - 75mmTank width - 620mm
Total width - 715mm
Total thickness with radiator & fans - 145mm
Inlet/Outlet Size - Both 38mm
Features:
• Full Aluminium construction.
• 1/8” NPT temperature sensor port and hex bung.
• V2 Fenix radiator cap.
• V2 billet drainage bung.
• Embossed Fenix logo on top tank.
NOTE: This kit is designed for use on the Chev v8 but can be used with an LS2 swap. You will need to find custom pipes to suit but it will bolt up and clear everything!
This rad comes with the Auto trans cooler. Fenix does not make a manual specific rad anymore.
If you want to bung the trans ports off (Not recommended) the threads are AN-6.
Upgrade your old, stock radiator with a Fenix Performance Nissan alloy radiator. Designed with performance and reliability in mind, we find the weak points of OEM radiators and eliminate them, while offering a factory fit and an increased cooling efficiency of up to 30%.
*Core size is tube and fin area only and does not include tanks or plate under tank.
