Drop in hanger with filler for Raceworks Fuel Cells. Adjustable in height and can be configured with either single or twin fuel pumps. Includes dual Stainless Electrical Terminals with PTFE Seals, allowing the pumps to be staged. Features 3 x AN-8 ORB ports on top next to a screw on fuel filler cap.
Anodised in Black and includes a Viton O-ring providing corrosion resistance when used with E85. Supplied with PTFE Intank Hose and stainless clamps. Suitable for Tanks with height 180-250mm.
Raceworks Hangers are an addition to our fuel cell range, allowing the use of modern high-flow intank fuel pumps. They suit a range of pump diameters from 39-40mm, and are height adjustable. They can be used with custom fuel tanks also, through the use of a steel or aluminium weld ring.
All Raceworks products come with a 2 year warranty.
Features:
- Suitable for Tanks with Height 180-250mm.
- Suitable for 39-40MM Pumps
- Aluminium Weld Ring: ALY-119-A
- Steel Weld Ring: ALY-119-S
Fuel Pump Compatibility:
Raceworks Ti Automotive (Walbro)
EFP-500 F90000262
F90000267
F90000274
F90000285
F90000295
GSS340
GSS341
GSS342
GSS350
GSS351
GSS352
*Ti Automotive F Series pumps don’t sit level, due to Raceworks Fuel Cell Filler holes being too small to install the pumps. Therefore, use one pump with FPS-067 45deg strainer. Ensure both strainers are bottomed out on the tank floor. F Series pumps will happily lift 1.5’. This method is tested and proven to work successfully.