free shipping on orders over $250 t&c's Apply (excludes bulky items) see shipping policy for more info

Please Note: Due to the US tariffs we have temporarily suspended all shipping to the US and Puerto Rico. Please email us directly if you require items to be shipped to these regions.

Link Engine Management

Link ECU G4X VLLink - HVLC for RB30ET

$2,245.00
No reviews yet Write a Review
Adding to cart… The item has been added
SKU:
207-1000
Condition:
New
Availability:
Special Made to Order Only- Please Email for Availability
Weight:
1.50 KGS
Shipping:
Calculated at Checkout
  • Free Domestic Shipping

  • Exchanges Welcome

  • Safe Payments

  • Amazing Selection

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the model listed below. 

This ECU is designed for the RB30ET engine. 

  • Please check your connector matches the header in the listed photo before purchasing.  
  • This ECU works for manual transmissions only.
  • Includes onboard 4 bar MAP sensor or 7 Bar MAP sensor.
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options.
  • 6 ignition outputs available to allow direct spark conversion.
  • This ECU will need a modification before E-Throttle is usable. 


Suitable applications:  

Holden VL RB30ET. 

*Note the connector for this ECU is now obsolete, we need your original ECU to salvage the connector off to be able to manufacture the new ECU.  For this reason they generally aren't kept in stock - Made to order with short lead time.  

*Other models such as the RB30E, R31 Skyline, RB20E, L20E and L20ET may be supported too. Check with Sales or Tech Support before purchasing.  

Features

Up to 6D fuel and ignition mapping
Precision closed loop cam control (four cam, independent control)
Sequential fuel delivery
Digital triggering, all OEM patterns
OEM idle hardware supported
5D boost control with three switchable tables
Motorsport features - antilag, launch, flat shift
Continuous barometric correction (on board)
CAN port
QuickTune - automated fuel tuning
Individual cylinder correction
USB tuning cable included
Stats recording into on-board memory
Gear compensations for spark, boost and fuel
Real time selectable dual fuel, ignition and boost maps
Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
Boost control referenced to gear, speed or throttle position
Up to 32Mbit internal logging memory
Staged injection
Knock with "windowing"

The following expansion connector inputs/outputs are provided: 

Expansion Connector 1:  
Gnd                 Sensor Ground Only  
+5V Out           Low Current +5V Supply 
DI5                  Digital Input 
DI6                  Digital Input 
An Volt 5          Analog 0-5V input 
An Volt 6          Analog 0-5V input 
An Temp 2        Temperature sensor input 
An Temp 3        Temperature sensor input 

Expansion Connector 2:  
An Temp 4        Temperature sensor input 
Ign 6                Ignition 6 Auxiliary Output 
Ign 5                Ignition 5 Auxiliary Output 
Ign 4                Ignition 4 Auxiliary Output 
Ign 3                Ignition 3 Auxiliary Output 
Ign 2                Ignition 2 Auxiliary Output 
Ign 1                Ignition 1 Output (Shared with main header) 
Gnd                  Sensor Ground Only 

Link Engine Management Ltd – Limited Lifetime Warranty This Limited Lifetime Warranty applies to all Engine Control Units (ECUs), Power Distribution Modules (PDMs), DI-Drivers, and CAN-Lambda modules (“Products”) manufactured by Link Engine Management Ltd. WARRANTY COVERAGE Link Engine Management Ltd warrants that its Products are free from defects in materials and workmanship under normal use and installation, for the lifetime of the Product, subject to the limitations outlined below. This warranty applies only to the original purchaser of the Product and is non-transferable. If a defect arises and a valid claim is received, Link Engine Management Ltd will, at its sole discretion: repair the defective Product, or replace it with a new or refurbished Product of comparable function. If a Product is found to be defective, it must be returned to the original place of purchase along with proof of purchase. Any repaired or replaced Product is covered only for the remainder of the original warranty period. WARRANTY EXCLUSIONS This warranty does not cover: Products that have been damaged or impaired due to incorrect installation, misuse, neglect, accident, or external causes, Normal wear and tear or cosmetic damage, Products that have been modified or used with incompatible software or components, Are installed in highway-registered vehicles (Products are intended for off-road use only). CONSUMER RIGHTS This warranty provides specific legal rights and may be supplemented by local consumer protection laws in your country. Where applicable, you may have additional rights under national legislation, including but not limited to: The Consumer Guarantees Act (New Zealand), The Australian Consumer Law, The Magnuson-Moss Warranty Act (USA), The EU Consumer Rights Directive. Nothing in this warranty limits or excludes any rights you may have under such laws. LIMITATIONS Link Engine Management Ltd is not liable for any: Indirect or consequential losses (such as vehicle damage, loss of income, or labour costs), Damages arising from the use of the Product outside its intended purpose, Failures caused by third-party software or incorrect setup of user-configurable features. SOFTWARE LICENCE The Product includes a user-configurable software programme, which must be installed using the latest version available from the Link Engine Management website. The warranty is voided if: The incorrect or outdated software version is used, or The user attempts modifications or setups that aren’t supported. The software included in the Product is licensed, not sold. It may only be used in accordance with Link’s license terms. Link Engine Management Ltd grants the user a non-exclusive license to use the software: Only in the country where it was originally acquired, On a single device at a time, In accordance with the applicable End User Licence Agreement (EULA). If the license is terminated by you or by Link (e.g. for breach of terms), the software must be permanently deleted.